Description

Specification

• Radio module:
  • Espressif ESP32-C3 module
  • Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW)
  • FCC & CE certified radio module
• Firmware:
  • ArduRemoteID (https://github.com/ArduPilot/ArduRemoteID).
  • Supports upgrading firmware via the web interface (“OTA”)
• Supported in PX4 & Ardupilot (More Info)
• Protocol: CAN & Serial
• Interface:
  • 1x JST GH 4-pin CAN (CAN) port
  • 1x JST GH 6-pin TELEM (UART) port
• Antenna Connector type:
  • On CNC Case: SMA connector
  • On PCB: IPEX Connector
• Range: > 5km detection range*
• Power: 5V supplied from TELEM or CAN port
• LED lights: Bright RGB status LED
• Dimensions:
  • Without case: 35.3 x 23.5 mm (not including antenna)
  • With CNC case: 38 x 26.5 x 11.5 mm (not including antenna)
• Mount: M2 screws
• Operating temperature: -40°C to +85°C
• Weight:
  • PCB only: 4 g
  • With CNC case & Antenna: 27.5g
  • Without case & Antenna: 16.5g (Cable 20cm)
• Certification: FCC& CE

* The detection range depends on many factors such as the receiver antenna gain, transmission protocol, weather conditions, flying height, receiver height, line of sight, etc. With professional receivers, a range of 5 km or more is possible.

Guides & Reference L